Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
PK 26002 EH High Performance
The E-HPLS and the enormous reach opens up a wide range of applications
- More efficiency with fly jib due to DPS Plus
- Perfect appearance and the highest value retention due to coating technology
- Additional applications with Power Link Plus
- Increased operating times due to low-maintenance extension system
- High operator friendliness thanks to optional radio remote control
Brochures
PK 23502 / 26002 EH
| Max. lifting moment | 24.9 |
| Max. lifting capacity | 8900 |
| Max. hydraulic outreach | 21.3 |
| Max. outreach (with fly jip) | 27.2 |
| Slewing angle | 400° |
| Slewing torque | 2.8 |
| Stabilizer spread (std) | 5.0 m |
| Fitting space required (std) | 0.96 |
| Width folded | 2.53 |
| Max. operating pressure | 350 |
| Pump capacity | 75 - 100 l/min |
| Dead weight (std.) | 2583 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 24.2 mt | 8.1 m | 400 | 2.8 | 35.0 Mpa | 75-100 | 2583 kg | 2350 mm | 2525 mm | 955 mm | 7880.01 mm | 8900 kg | 3000 kg |
| B | 23.6 mt | 10.2 m | 400 | 2.8 | 35.0 Mpa | 75-100 | 2764 kg | 2350 mm | 2525 mm | 955 mm | 10060.01 mm | 8500 kg | 2200 kg |
| C | 23.1 mt | 12.4 m | 400 | 2.8 | 35.0 Mpa | 75-100 | 2943 kg | 2350 mm | 2525 mm | 1030 mm | 12240.01 mm | 8200 kg | 1680 kg |
| D | 22.6 mt | 14.6 m | 400 | 2.8 | 35.0 Mpa | 75-100 | 3120 kg | 2350 mm | 2525 mm | 1070 mm | 14420.01 mm | 7850 kg | 1260 kg |
| E | 22.1 mt | 16.8 m | 400 | 2.8 | 35.0 Mpa | 75-100 | 3266 kg | 2350 mm | 2525 mm | 1105 mm | 16650.01 mm | 7500 kg | 970 kg |
| F | 21.7 mt | 19.1 m | 400 | 2.8 | 35.0 Mpa | 75-100 | 3379 kg | 2350 mm | 2525 mm | 1105 mm | 18880.01 mm | 7300 kg | 750 kg |
| G | 21.4 mt | 21.3 m | 400 | 2.8 | 35.0 Mpa | 75-100 | 3488 kg | 2350 mm | 2525 mm | 1105 mm | 21110.01 mm | 7000 kg | 570 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
